BYDFi Fees Explained: Spot, Futures, Funding and Hidden Costs
BYDFi advertises 0.1% spot fees (maker and taker) and lower perpetual futures rates of 0.02% maker / 0.05% taker as of 2026. Funding resets every 8 hours. Withdrawal costs are network-dependent and represent the most variable line item for active traders.
If you’ve been researching BYDFi and found the fee page difficult to parse, you’re not alone. Crypto exchange fee schedules tend to bundle several distinct cost types — per-trade fees, periodic funding charges, withdrawal levies — into a single table that assumes you already understand which line applies to you. This guide unpacks each layer for BYDFi specifically, with enough context to know whether the numbers are competitive or just average. Our full exchange write-up at /exchanges/bydfi/ covers the broader platform; here the focus stays on what you actually pay.
Spot Trading Fees
BYDFi’s spot market uses a maker-taker model, but at the standard tier both sides pay the same rate: 0.1% as advertised in 2026. That symmetry simplifies the math — a $10,000 buy costs $10 in fees regardless of whether your order rested in the book or was filled immediately — but it does mean you get no edge for providing liquidity, which some exchanges reward with a lower maker rate or even a small rebate.
For context, 0.1% is the legacy industry benchmark that Binance set years ago. Some newer exchanges (and MEXC’s maker promotion in particular) have pushed rates lower. Whether 0.1% matters in practice depends on your style. Swing traders executing a handful of large orders per month will barely notice. High-frequency or bot-driven traders where the fee is a material input to PnL will want to compare more carefully before committing volume.
Perpetual Futures Fees
The futures schedule is where BYDFi looks more competitive. Advertised rates as of 2026 are 0.02% maker and 0.05% taker on perpetual swaps. The table below summarizes the headline fees across the main product types:
| Product | Maker Fee | Taker Fee | Leverage (max) |
|---|---|---|---|
| Spot | 0.10% | 0.10% | 1× (no leverage) |
| Perpetual Futures | 0.02% | 0.05% | Up to 200× (select pairs) |
| Delivery Futures | Check fee schedule | Check fee schedule | Varies |
The futures taker rate of 0.05% is in line with Bybit and slightly better than some mid-tier competitors. Where BYDFi diverges from platforms like OKX or Bitget is in VIP tier depth — the discount ladder at BYDFi is less granular at very high volumes, so institutional-scale traders may find the ceiling lower than they’d like. Retail traders running a few contracts won’t hit those limits anyway.
One structural point worth noting: the 0.02% maker rate on futures is genuinely useful if you run limit orders consistently. On a $50,000 notional position, the maker vs. taker difference is $15 per round trip. That adds up if you’re active.
Funding Rates: The Cost Nobody Talks About Enough
Funding is the mechanism that keeps perpetual contract prices tethered to spot. It’s paid between long and short holders every 8 hours, based on a formula that reflects the premium or discount of the perpetual price relative to the index.
BYDFi uses the standard 8-hour interval. When the market is in a strong uptrend and longs are crowded, funding tends to be positive, meaning longs pay shorts. In bearish or sideways conditions it can flip negative. The rate is variable and published live on each contract page.
Why does this matter for a fees article? Because on a levered position held for several days, cumulative funding can easily exceed the initial entry fee. A 0.05% daily funding rate (roughly 0.017% per interval, compounded) on a 10× leveraged position translates to real money over a week. Before sizing any carry trade or trend-following position on BYDFi — or any exchange — build funding cost into your expected value calculation. The best high-leverage crypto exchanges breakdown on this site includes a section on how funding mechanics vary across platforms, which is worth reading alongside this guide.
Withdrawal Fees
Withdrawal fees on BYDFi follow the industry-standard approach: a flat fee per withdrawal that varies by asset and the network you choose. USDT on TRC-20 typically costs less than USDT on ERC-20 because Tron’s transaction fees are lower. BYDFi passes those network costs through, sometimes with a small margin added.
The practical implication is that network selection matters. If you’re moving USDT regularly, using TRC-20 or a chain with low base fees reduces friction considerably. Withdrawal fees are not prominently displayed during the account setup process, so it’s worth checking the fee schedule under the withdrawal flow before you commit to a large outbound transfer.
There are no advertised deposit fees for crypto deposits. Fiat on-ramps (where available by region) may carry third-party processor charges that BYDFi does not control and lists separately.
Fee Tiers and Discounts
BYDFi adjusts fees based on 30-day trading volume, which is standard. Higher volume unlocks lower taker rates on futures primarily; the spot fee is less differentiated across tiers in the advertised schedule. The thresholds and exact rates at each level are published on the exchange’s fee page and can change, so treat any third-party summary (including this one) as a starting point rather than the authoritative figure.
There is no prominent native token discount mechanism on BYDFi equivalent to BNB on Binance or FTT’s former role elsewhere. Some exchanges offer 10–25% fee reductions for holding or spending a platform token, and BYDFi’s model doesn’t lean heavily on that structure.
What “Hidden” Costs Actually Look Like
No crypto exchange is entirely transparent, and BYDFi is no exception to the general pattern. A few cost categories that are easy to miss:
Spread on illiquid pairs. The maker-taker fee applies to the trade, but if you’re buying a low-cap token with a wide bid-ask spread, the spread itself is a cost that doesn’t show up on the fee confirmation. Stick to major pairs if minimizing total execution cost is a priority.
Liquidation fees. On leveraged futures, if your position is liquidated, there’s a liquidation penalty on top of the loss of margin. BYDFi publishes these rates in its futures terms. At high leverage levels (100×, 200×), the liquidation fee is a real consideration when sizing positions.
Third-party conversion costs. If you’re using a fiat on-ramp or P2P desk to get funds onto the exchange, those providers set their own margins, which may be 1–3% above spot depending on the method.
For a head-to-head view of how these costs stack up against another popular exchange, the BYDFi vs MEXC comparison on this site goes through both fee schedules side by side and covers some of the edge cases above.
Putting It Together
BYDFi’s spot fees are average, its futures fees are decent, and the funding mechanism is standard. The areas that require active attention are withdrawal fee optimization (network selection), funding costs on carried positions, and the thinner VIP tier structure at high volumes compared to top-tier exchanges. None of this is disqualifying for most retail traders, but it’s information worth having before you route significant volume.
For traders who are primarily derivatives-focused and want leverage up to 200×, BYDFi’s futures cost structure is workable. For pure spot traders who prioritize the lowest possible fees, the comparison landscape is competitive enough that it’s worth checking /rankings/exchanges/ to see where BYDFi sits relative to current alternatives.
The fee schedule can and does change, so the figures above should be verified directly on BYDFi’s fee page before making any decision based on them.
Frequently asked questions
What are BYDFi's spot trading fees?
BYDFi advertises a flat 0.1% fee for both maker and taker orders on its spot market as of 2026. There is no distinction between the two sides at the standard tier, which keeps the structure simple but means passive liquidity providers don't get a rebate the way they might on Binance or OKX.
How much does BYDFi charge for perpetual futures, and does maker rebate apply?
BYDFi advertises 0.02% maker and 0.05% taker fees on perpetual swaps as of 2026. There is no maker rebate at the base tier, though higher-volume tiers may reduce taker costs. Compared to the industry average of roughly 0.02%/0.06%, BYDFi's futures schedule is competitive but not exceptional.
What is the funding rate on BYDFi and how often does it reset?
BYDFi perpetual contracts use an 8-hour funding interval, which is the standard across most centralized derivatives exchanges. The funding rate itself floats with market sentiment — it can be positive or negative — and the exchange publishes the current rate on each contract's detail page before you open a position.
How do BYDFi fees compare to MEXC or Bitget?
On spot, BYDFi's 0.1% rate matches MEXC's standard taker fee but is above MEXC's zero-maker promotion (see our MEXC comparison for full context). Bitget's standard futures taker sits at 0.06%, slightly above BYDFi's advertised 0.05%. No single exchange wins across all categories; the right choice depends on which product you use most.
Does BYDFi have a VIP or volume-based fee discount program?
BYDFi does operate a tiered fee structure where higher 30-day trading volumes unlock reduced rates, as is standard for centralized exchanges. The specific thresholds and discount levels are published in the exchange's fee schedule page. Token-based discounts, comparable to BNB on Binance, are not a prominent feature of BYDFi's model.
Is BYDFi safe and regulated?
BYDFi holds licenses in multiple jurisdictions and has been operating since 2019 under its earlier BitYard branding. Our full review at /exchanges/bydfi/ covers the regulatory picture, proof-of-reserves status and custodial setup in detail. Fee structure and safety are separate questions; a cheap exchange that mismanages funds is not a bargain.
Do BYDFi fees change if I use high leverage?
The maker/taker rate itself does not change based on leverage level. However, at higher leverage the funding cost and liquidation risk both scale up, so the effective cost of holding a leveraged position overnight can be significantly greater than the headline trade fee. BYDFi supports up to 200x leverage on select contracts, making this worth modeling before sizing a position.